tesa 51960 PP Tape white translucent
Conglutination of edges and ends on foam or textile backed floor coverings and PVC and CV floors on almost any surface.
tesa® 51960 is a double-sided tape for laying floor coverings. The open side can be largely removed from many surfaces without leaving any residue and consists of PP film with an acrylic adhesive. The different adhesive strength values are tailored to the installation of floor coverings and ensure very strong adhesion to many common surfaces.
tesa® 51960 is highly resistant to aging and plasticisers (no discoloration of PVC / CV floors). The side with the stronger tack is covered with a white liner.
Technical information
The values in this section are intended to be representative and should not be used for specific purposes.
Technical data
• Carrier PP film reinforced with fabric
• Color translucent
• Total thickness 248 µm
• Type of adhesive tackified acrylic
• Elongation at break 80%
• Tensile strength 30 N / cm
Adhesive strength on
• steel (direct) 4.7 N / cm
• steel (covered side, direct) 9.0 N / cm
• PE (direct) 3.0 N / cm
• PE (covered side, direct) 4.5 N / cm
PP (direct) 3.5 N / cm
• PP (covered side, direct) 4.2 N / cm
• sample (after 14 days) 6.6 N / cm
• steel (covered side, after 14 days) 13.7 N / cm
• PE (after 14 days) 3.5 N / cm
• PE (covered side, after 14 days) 5.1 N / cm
Properties
• Short term temp resistance. 120 ° C
• Long term temp resistance. 60 ° C
• Adhesion = good
• Moisture resistance = very good
• Resistance to chemicals = very good
• Resistant to plasticisers = moderate
• Static shear resistance at 23 degrees C = moderate
• Static shear resistance at 40 degrees C = poor
Additional information
According to DIN 18365, the surface must be flat, clean, permanently bonded and dry, as well as free from oil or wax.
(Not suitable for natural stone)
For the latest information on this product, go to
http://l.tesa.com/?ip=51960
| SKU | AW51960CONFIG |
|---|---|
| GTIN-EAN / UPC | 4042448808059 |
| Shortid | TESAFIX 51960 |
| MPN-Manufacturer part number | 51960-60000-00 |
| Condition | New |
| Expected delivery date | 08-06-2026 |
| Production tolerances: |
Cutting Roll width up to 100mm +/- 1.0mm and above 100mm +/- 2.0mm. Roll width outer diameter with respect to roll width core diameter +/- 1.0mm. Water is used. This can leave "stains", but does not affect the adhesive result |
| Most sold in the branch(ses) | Contruction, Project design & Home furnishings, Exhibition and Advertising |
| Width (mm) | 1240 |
| Length (m) | 25 |
| Thickness (mm) | 0.240 |
| Brand | tesa |
| adhesive | Acrylic |
| carrier | PP |
| Color | Transparent |
| adhesion to steel (N/100 mm) | 4.7 |
| Elongation at break (%) | 80 |
| Treksterkte (N/cm²) | 30 |
| Temperature resistance ° C | kort 120°C; lang 60°C |
| Special characteristics | tesa® 51960 is in hoge mate bestand tegen veroudering en weekmakers (geen verkleuring van PVC-/CV-vloeren). De kant met de sterkere kleefkracht is bedekt met een witte voering. |
| remaining | Drager PP-folie versterkt met weefsel |
| Search terms | tesa, 51960, tape, double sided tape, single sided tape, custom, die cutting, Tapir Tapes, AW51960CONFIG |
